Hydraulic flow recalibration · Tier 4 Final emissions audit · excavator dig-depth and breakout verification for mass earthworks and quarry fleets.
Each tier writes haul-road kilometers, dig cycles and attachment hours into a scoped ISO 9001 service contract so procurement can audit uptime before the next pour window.
| Tier | Inclusion | Boom / Hydraulic Audit | Documentation |
|---|---|---|---|
| T1 Mass Earthworks | 24/7 dispatch · travel-motor warranty | Quarterly slew-bearing & track-tension | ISO 9001 audit pack + Tier 4 NOx log |
| T2 Aggregate / Quarry | Scheduled bucket & tip rotation | Monthly hydraulic pressure & ISO 4406 sample | Wear-rate trend chart for rock buckets |
| T3 Foundation Dig | Dig-depth verification before pour | Pin gauge, stick geometry, breakout check | Pour-window excavator readiness report |
| T4 Highway Cut & Fill | Pre-season attachment calibration | Quick-hitch torque · breaker circuit verify | MoE earthworks density support pack |
Haul-road kilometers, dig counts and attachment hours are written into the service contract so both EPC engineers and fleet managers share one uptime definition.
DPF and SCR samples under load follow the ISO 8178 C1 cycle and are submitted to the project EHS officer before urban or highway bid packages close.
Stick pin NDT, boom clearance and hydraulic pressure checks confirm excavator digging depth and breakout force before critical foundation pours.
MTBF, MTTR and ISO 4406 hydraulic cleanliness trends are signed by the Komatsu reliability lead and issued to the engineer of record.
ISO 9001 service riders cover the conditions below; work outside these limits is quoted as a separate engineering change.
Twenty-eight pages covering hydraulic recalibration, Tier 4 audits and excavator readiness checklists for quarry and foundation programs.
Download PDF (28 pages)